- Member ID
- #1009
- Messages
- 4,275
- Reactions
- 14,751
- Likes
- 252
- City
- The Villages
- State
- FL
- Country
- United States
- Vehicle
- 2021 Jeep GC 5.7 TrailHawk
-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Dodge, Jeep and RAM Forum dedicated to FCA owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the SRT Forum today!
How much oil in your catch can?
- Thread starter AeroF16
- Start date
BULL
Oh NO! Not that guy!
Staff Team
Founding Member
U.S. Marine Veteran
Donating Member
HFCOTM
Wiki Contributor
- Member ID
- #1079
- Messages
- 15,253
- Reactions
- 47,453
- Likes
- 402
- City
- Weld County
- State
- CO
- Country
- United States
- Vehicle
- MY16 M6 Challenger Hellcat
- HFCOTM
- View Images
OP
Thread Starter
#64
- Member ID
- #2826
- Messages
- 2,197
- Reactions
- 7,014
- Likes
- 252
- City
- Phoenix
- State
- AZ
- Country
- United States
- Vehicle
- 2016 Challenger Hellcat
Thread Starter
#64
Any chance it’s just wording?
I.e. the 2016 FSM says to fill the oil filter before install (which I think takes quite a bit of oil) then add oil and check the level. Maybe nominally the engine, after you fill the oil filter, takes another 6 quarts?
Vs the other manuals that just say fill with 7 quarts and maybe assume you don’t fill the filter during install?
Just random guessing…
I.e. the 2016 FSM says to fill the oil filter before install (which I think takes quite a bit of oil) then add oil and check the level. Maybe nominally the engine, after you fill the oil filter, takes another 6 quarts?
Vs the other manuals that just say fill with 7 quarts and maybe assume you don’t fill the filter during install?
Just random guessing…
- Member ID
- #1009
- Messages
- 4,275
- Reactions
- 14,751
- Likes
- 252
- City
- The Villages
- State
- FL
- Country
- United States
- Vehicle
- 2021 Jeep GC 5.7 TrailHawk
OP
Thread Starter
#66
- Member ID
- #2826
- Messages
- 2,197
- Reactions
- 7,014
- Likes
- 252
- City
- Phoenix
- State
- AZ
- Country
- United States
- Vehicle
- 2016 Challenger Hellcat
Thread Starter
#66
So I changed my oil and filter today and used 6.5 quarts total but was reminded of this conversation.
The FSM says to fill the filter before install - which actually takes a bit of time (maybe 10 minutes?) I eventually put almost 0.5 quarts in the filter before install but you have to fill, wait for it to settle and burp, then fill, wait for it to settle and burp the air out, and repeat quite a few times.
After that I installed the filter and 6 quarts in the engine. My dipstick (factory 2016) shows full. The FSM also warns against over filling, so I’m just sticking with the 6 quarts it calls for (plus the half quart in the filter).
The FSM says to fill the filter before install - which actually takes a bit of time (maybe 10 minutes?) I eventually put almost 0.5 quarts in the filter before install but you have to fill, wait for it to settle and burp, then fill, wait for it to settle and burp the air out, and repeat quite a few times.
After that I installed the filter and 6 quarts in the engine. My dipstick (factory 2016) shows full. The FSM also warns against over filling, so I’m just sticking with the 6 quarts it calls for (plus the half quart in the filter).
- Member ID
- #975
- Messages
- 14,150
- Reactions
- 75,674
- Likes
- 402
- City
- Sketchy
- State
- MI
- Country
- United States
- Vehicle
- 2016 Challenger Hellcat M6
BULL
Oh NO! Not that guy!
Staff Team
Founding Member
U.S. Marine Veteran
Donating Member
HFCOTM
Wiki Contributor
- Member ID
- #1079
- Messages
- 15,253
- Reactions
- 47,453
- Likes
- 402
- City
- Weld County
- State
- CO
- Country
- United States
- Vehicle
- MY16 M6 Challenger Hellcat
- HFCOTM
- View Images
- Member ID
- #1044
- Messages
- 5,828
- Reactions
- 29,376
- Likes
- 352
- City
- Riverside
- State
- CA
- Country
- United States
- Vehicle
- 2015 Dodge Charger Hellcat!
7 qts, total.
Engineering Change Order.
Just did an oil change, while installing new oil cooler lines. Bought 5 qt bottle and two singles. Filled the filter and dumped the rest, in the engine.
Mine is MY15. New dipstick. Full, at 7 qts.
My 6.1 took 7 qts. Never understood why 15 & 16 called out for 6.5. Same block. Then... no physical changes and 17+ get 7?
Stick with 7, MY15 and on.
.02
Sent from my SM-G955U using Tapatalk
Engineering Change Order.
Just did an oil change, while installing new oil cooler lines. Bought 5 qt bottle and two singles. Filled the filter and dumped the rest, in the engine.
Mine is MY15. New dipstick. Full, at 7 qts.
My 6.1 took 7 qts. Never understood why 15 & 16 called out for 6.5. Same block. Then... no physical changes and 17+ get 7?
Stick with 7, MY15 and on.
.02
Sent from my SM-G955U using Tapatalk
- Member ID
- #1047
- Messages
- 1,328
- Reactions
- 3,398
- Likes
- 162
- City
- PEORIA
- State
- AZ
- Country
- United States
- Vehicle
- '16 Challenger HC, '19 Durango SRT, '22 Charger SP
Yea, I and others were knee deep in the dipstick fiasco on the "old" forum. I am of the belief the mothership made internal errors with both the dipstick length and the tech pubs as mentioned, and 7 qt is the proper fill amount. During that time, I had the unplanned "opportunity" to let my oil pan and cooler drain for a week. Upon refill after this abnormal drain time, it took 7.5 qt to get back to full, on what I and others believe to be the correct (short) dipstick. To each their own.
-
3
- Show All
