-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Dodge, Jeep and RAM Forum dedicated to FCA owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the SRT Forum today!
How to put a Kirkey Drag Race Seat in a Challenger
- Thread starter DRAGRCR
- Start date
OP
Thread Starter
#43
- Member ID
- #1181
- Messages
- 1,567
- Reactions
- 5,177
- Likes
- 162
- City
- VICTORVILLE
- State
- CA
- Country
- United States
- Vehicle
- MANGO D170
Thread Starter
#43
OK, so if you do not want to make your own brackets we have come out with some that are really trick. They are really strong considering how light they are. Made from 3/8" aluminum. I was buying brackets from OMP for about $210 shipped and then extensively modifying them. Now you can buy these and use them as is. They are about 2 pounds each. $450 a set. I beta tested some with a 20" kirkey today. They will also work with a 18.5" and they can be used with a 17" along with spacers same as I was doing before.
Last edited:
-
3
- Show All
OP
Thread Starter
#44
- Member ID
- #1181
- Messages
- 1,567
- Reactions
- 5,177
- Likes
- 162
- City
- VICTORVILLE
- State
- CA
- Country
- United States
- Vehicle
- MANGO D170
Thread Starter
#44
OK Guys, get out the Sledge Hammer. Well really a Single Jack. This has been on my list of honey doos for a while. And my Demon 170 Jailbreak activities have been put on temporary hold.
I did 2 things. I modded the seat to put the seat belt buckle inside and I routed the anchor side inside the cutout. Feels a little better when I am belted in. Likely a little safer if....................
Last pic is the old way...........
I did 2 things. I modded the seat to put the seat belt buckle inside and I routed the anchor side inside the cutout. Feels a little better when I am belted in. Likely a little safer if....................
Last pic is the old way...........
Last edited:
-
3
- Show All
