Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Dodge, Jeep and RAM Forum dedicated to FCA owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the SRT Forum today!
Man we've got to meet up again! You're hardcore! I'll race you in my M6 if you give me 10 lengths! Shit still probably not enough! However I have a Pedal Commander! Beware!
I'll be getting driveshaft and trans service this week hopefully...the D5 Beadlocks and 315/50 are being paid for in the AM and then I'll be switching to a 2.79 for daily and test hitting the 2.50/E85 kill tune for curt to double check.
Almost be ready when they finally lift the communist rule here in PA.
Take it from me, if I had to do it again...wound NOT go with the 2.5 Metoc upper and nothing below. The 2.65 upper and 10% lower is better for the blower and same power and will last longer.
I would buy the Littens (Hellraiser)...hate to hear the belt slippage on my Metco.
Take it from me, if I had to do it again...wound NOT go with the 2.5 Metoc upper and nothing below. The 2.65 upper and 10% lower is better for the blower and same power and will last longer.
I would buy the Littens (Hellraiser)...hate to hear the belt slippage on my Metco.
I ran the 2.5 upper only for a year and the 2.4 upper only for a year. Both were fine. 2.5 spins less than a 2.75/10 and the 2.4 spins a tad faster than the 2.65/10 combo. At least the Metco opposed to griptec allow the belt to slip on deceleration, which is good.
Take it from me, if I had to do it again...wound NOT go with the 2.5 Metoc upper and nothing below. The 2.65 upper and 10% lower is better for the blower and same power and will last longer.
I would buy the Littens (Hellraiser)...hate to hear the belt slippage on my Metco.
Better for the blower because of the reduced tension on the belt?
Overall speed is faster at the blower with a 2.65/10% vs the 2.5 (as @FFBOS said), and that seem to be the primary culprit when people break them.
Better for the blower because of the reduced tension on the belt?
Overall speed is faster at the blower with a 2.65/10% vs the 2.5 (as @FFBOS said), and that seem to be the primary culprit when people break them.
Nice. What is the difference in the tune of any between runs one and two if any? It was 108 here today and although the Tucson track opened last week I think I will pass for now.
Not sure why anyone is surprised by the results of the Jokerz ported blower. I already posted my results from the Jokerz ported blower a few months ago here on this forum and it was very similar. I actually made more power with a 2.85 pulley and Jokerz ported blower compared to the stock blower and 2.65 pulley.
Not sure why anyone is surprised by the results of the Jokerz ported blower. I already posted my results from the Jokerz ported blower a few months ago here on this forum and it was very similar. I actually made more power with a 2.85 pulley and Jokerz ported blower compared to the stock blower and 2.65 pulley.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.